Specialist Chemicals, Solvents & Lubricants
Phone: 01539 722247       Email

Search for products
Molykote 1000
Solid Lubricant Paste

Description Instructions Sizes, Prices & Offers

Solid lubricant paste for bolted metal joints; contains no lead or nickel.
Suitable for bolted joints that are subjected to high temperatures up to 1100C and to corrosive effects, and which, after assembling and the initial operation, have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady co-efficients of friction of the lubricant are necessary.
Used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry and also for the tension rings of centrifuges.
Can be used over a wide temperature range (-30C to + 1100C). High load bearing capacity. Enables non-destructive dismantling, even after long use at high temperatures. Co-efficient of friction unchanged in the area of oiled bolts, even after several bolt re-tightening and loosening processes.
Solid lubricants - Mineral oil - Thickener - Powdered metal

For full technical information see:
Molykote 1000 Technical Data Sheet.

How to Use
If possible, clean the thread and the bolt with a wire brush. Spread an adequate amount of the paste on the thread, right up to its root in order to obtain a good seal. In order not to alter the properties the paste must not be mixed with grease or oils. It is advisable to use the aerosol application to enable this product to be applied more quickly and cleanly to larger areas.
Note: Coefficient of friction( 8.8 blackened surface)Thread - blackened 0.11
Head - blackened 0.10

For professional use only. The above information is given in good faith but without warranty and does not constitute a technical specification. For technical support and application guidance call 01539 722247. Technical specifications and certificates of conformity and analysis available on request.

Instructions for Use
Use only as directed on the product label, or contact SwanTek on 01539 722247 for technical advice.

Special Offers
To order call 01539 722247 now!

For help with how to place your order click here.

Code Pack Size Price Per Notes Buy Now
ASS11301 10 x 250g Please call or email for current price Click & Buy
ASS11303 6 x 1kg Please call or email for current price Click & Buy
1. Prices exclude VAT and are valid only for pack sizes stated. Prices subject to change without notice.
2. For volume discounts other than those shown above call 01539 722247.
3. Delivery is usually next working day for items in stock. Delivery charged by weight from 13.50 to a maximum of 45.00. Additional charges apply for delivery to Scottish Highlands, Northern Ireland and offshore islands, and for timed deliveries, hazardous goods and branded lubricants.
4. All major credit/debit/purchasing cards accepted. Minimum credit account invoice applies.