| |
Novus ExtraLube 600
High temperature Grease -30°C to 600°C
Description • Instructions • Sizes, Prices & Offers
• Safety Data Sheet
SwanTek® 'Novus' Arduous Duty greases meet the needs of most aggressive working conditions including temperature extremes, high loading, shock loading, vibration, high speed, wet and saturated conditions, corrosive conditions, chemical or/and dust and dirty environments
'Novus' specialist lubricants are designed for extreme operating environments where more conventional types of lubricants are limited in their ability to withstand extreme conditions and breakdown prematurely, resulting in frequent re-lubrication intervals, and on many occasions frequent component replacement.
INTRODUCTION
SwanTek® 'Novus' ExtraLube 600 is an industrial, extreme temperature, medium consistency, plain and rolling bearing grease for applications of operating temperatures up to 600oC. It is a dispersion of fine particle size graphite, incorporated in a synthetic fluid which evaporates cleanly at high temperatures without leaving abrasive ash deposits.
ExtraLube 600 is primarily designed for extreme temperature operations such as kiln car bearings, furnace door and drying tunnel mechanisms.
At very high temperatures, conventional high temperature greases have severe limitations as their performance is restricted by their base fluid and thickener systems. These degrade at high temperatures destroying the grease structure so shortening the useful working life of the grease, they also form abrasive carbon deposits. ExtraLube 600 is designed so that, at elevated temperatures, its liquid phase evaporates without leaving abrasive carbon deposits.
COST SAVING BENEFITS
1. No carbonisation at high temperatures, greatly reduces maintenance costs and extends component life.
2. Graphite lubricating film reduces wear
3. Does not cause bearing seizure caused by deposits left behind by conventional high temperature greases.
TYPICAL PHYSICAL CHARACTERISTICS
Colour - Black
Base Oil - Polyalkaline glycol
NLGI consistency - 2
Dropping point (ASTM D2265) - Nil
Base fluid viscosity (IP71)
@ 40oC - 128 cSt.
@ 100oC - 25 cSt.
@ -30oC - 20,000 cSt.
Operating temperature range - -30oC to +600oC
For professional use only. The above information is given in good faith but without warranty and does not constitute a technical specification.
For technical support and application guidance call 01539 722247.
Technical specifications and certificates of conformity and analysis available on request.
| Instructions for Use |
Extralube 600 must be applied sparingly preferably by hand, after fitting and before assembling the bearing housing. It can also be applied as a service lubricant by high pressure grease gun. Anti-friction bearings housings need to be vented so not to inhibit the evaporation process of the base fluid. (On anti-friction bearings, over lubrication must be avoided as this could lead to an excessive build-up of graphite in the rolling elements of the bearing).
Bearings need to be purged of the previous grease before starting to use Extralube 600
|
| Special Offers | |
To order call 01539 722247 now!
|
For help with how to place your order click here.
| Code | |
Pack Size | |
Price | |
Per | |
Notes | |
Buy Now |
| |
Notes
1. Prices exclude VAT and are valid only for pack sizes stated. Prices subject to change without notice.
2. For volume discounts other than those shown above call 01539 722247.
3. Delivery is usually next working day for items in stock. Delivery charged by weight from £13.50 to a maximum of £45.00. Additional charges apply for delivery to Scottish Highlands, Northern Ireland and offshore islands, and for timed deliveries, hazardous goods and branded lubricants.
4. All major credit/debit/purchasing cards accepted. Minimum credit account invoice applies. |
|
