Description • Instructions • Sizes, Prices & Offers

INTRODUCTION
AeroShell Turbine Oil 560 is a third generation, high performance, low coking 5 mm 2/s synthetic hindered ester oil incorporating a carefully selected and finely balanced combination of additives to improve thermal and oxidation stability.

APPLICATIONS
Changes which have taken place over the last twenty years in engine performance (in terms of improved fuel consumption, higher operating temperatures and pressures) and maintenance practices have resulted in increased severity in lubricant operating conditions.
AeroShell Turbine Oil 560 was developed to withstand the hostile environments of today’s high powered, high compression engines in which the older generation of oils can be stressed up to and beyond their thermal limits, as evidenced by oil coking in the high temperature bearing areas.
By overcoming the problems associated with using old technology oils in new technology engines, AeroShell Turbine Oil 560:
•maintains a cleaner engine
•provides improved load carrying capacity
• reduces maintenance costs
•prolongs bearing life in both new and existing engines.

In order for military users to take advantage of this better performance in military engines the specification MIL-PRF-23699 was re-written to include a "High Thermal Stability" (HTS) grade as well as the Standard (STD) and Corrosion Inhibited (C/I) grades. AeroShell Turbine Oil 560 is fully approved as an HTS oil.
With effect from January 1st 2002, AeroShell Turbine Oil 560 has been manufactured with an improved formulation to further enhance its anti-coking performance.
AeroShell Turbine Oil 560 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics. Refer to the General Notes at the front of this section for further information.

SPECIFICATIONS
U.S. Approved MIL - PRF -23699F Grade HTS
British Equivalent DEF STAN 91-101
French Equivalent DCSEA 299/A
Russian Analogue to VNII NP 5 0-1-4F, B3V,
LZ-240, VNII NP 50-1- 4U and 36/Ku-A
NATO Code O-154
Joint Service Designation Equivalent OX-27
Pratt & Whitney Approved 521C Type II
General Electric Approved D-50 TF1
Allison Approved EMS-53 (Obsolete)
EQUIPMENT MANUFACTURER’S APPROVALS
AeroShell Turbine Oil 560 is approved for use in all models of the following
engines:
Honeywell TFE 731, TPE 331, APUs (majority of
models), LTS 101, LTP 101, ALF 502,
LF 507, AS907, AS977
Allison (Rolls-Royce) 250 Series
BMW/Rolls-Royce BR710, BR715
CFM International CFM-56 (all models)

Pack sizes available: 12 x 1L; 1 x 20L; 1 x 209L

For full technical specifications and applications click here.

For professional use only. The above information is given in good faith but without warranty and does not constitute a technical specification. For technical support and application guidance call 01539 722247. Technical specifications and certificates of conformity and analysis available on request.

For help with how to place your order click here.

Notes 1. Prices exclude VAT and are valid only for pack sizes stated. Prices subject to change without notice. 2. For volume discounts other than those shown above call 01539 722247. 3. Delivery is usually next working day for items in stock. Delivery charged by weight from £13.50 to a maximum of £45.00. Additional charges apply for delivery to Scottish Highlands, Northern Ireland and offshore islands, and for timed deliveries, hazardous goods and branded lubricants. 4. All major credit/debit/purchasing cards accepted. Minimum credit account invoice applies.