SwanTek
Specialist Chemicals, Solvents & Lubricants
 Phone: 01539 722247       Email

Search for products
Molec Copper
Copper assembly, anti-seize and thread sealant spray: -20°C to 1100°C

Description • Instructions • Sizes, Prices & Offers • Safety Data Sheet

When you tighten any bolt, ask yourself this question: will I ever need to unscrew it? If the answer is yes, then you need to consider using Molec, the essential tool to ensure quick and easy dismantling of threaded fasteners and other joints.

Applications

• Assembly lubricant for threaded fasteners and other interfaces.
• Provides anti-seize protection up to 1100°C to allow for easy dismantling.
• Use on nuts, bolts, flanges, gaskets, pipe fittings, valves and other components which may require removal.
• Especially effective in the chemical manufacturing sector for fittings exposed to high temperatures and corrosive environments.

Benefits

• Lubricates to aid assembly of parts.
• Eases dismantling, reducing seizure and the need to drill out seized bolts.
• Protects threaded connectors from damage under high torque.
• Permits repeated tightening and unscrewing operations without seizure.
• Suitable for use on a wide range of hard and soft metals, including austenitic stainless steel.
• Protects against corrosion, even in corrosive chemical or salt water environments.
• Prevents friction scoring and corrosion.
• Provides long term protection.
• Ensures electrical conductivity across interfaces.

For professional use only. The above information is given in good faith but without warranty and does not constitute a technical specification. For technical support and application guidance call 01539 722247. Technical specifications and certificates of conformity and analysis available on request.

Instructions for Use
Aerosol application. Flammable propellant. Follow instructions on aerosol can for safe use

Anti-seize lubrication on assembly of plant components is a very much overlooked part of the plant maintenance programme. Anti-seize lubrication is not just a dab of grease on the end of a stud! Seeing the damage caused by the lack of correct lubrication at the assembly stage demonstrates the huge cost of repair and replacement. Much damage is caused to studs by either no assembly compound being used, or by applying just a dab to the end of the stud and relying on the action of the nut to carry the assemblycompound along the threads.

Assembly compounds should be applied over the whole distance of travel of the nut. The assembly compound should be applied right down to the base of the threads and also to the inside of the nut. Contact faces of nuts should be coated with assembly compound, as should both faces of any washers that are used. Excess assembly compound does no harm. On the contrary, it improves sealing and protection against corrosion.

Special Offers
To order call 01539 722247 now!

For help with how to place your order click here.

Code Pack Size Price Per Notes Buy Now
MOL22412 12 x 400ml £9.60 Each Click & Buy
MOL22412 24 x 400ml £9.25 Each Click & Buy
Notes
1. Prices exclude VAT and are valid only for pack sizes stated. Prices subject to change without notice.
2. For volume discounts other than those shown above call 01539 722247.
3. Delivery is usually next working day for items in stock. Delivery charged by weight from £13.50 to a maximum of £45.00. Additional charges apply for delivery to Scottish Highlands, Northern Ireland and offshore islands, and for timed deliveries, hazardous goods and branded lubricants.
4. All major credit/debit/purchasing cards accepted. Minimum credit account invoice applies.