Description • Instructions • Sizes, Prices & Offers

SwanTek® 'Novus' Arduous Duty greases meet the needs of most aggressive working conditions including temperature extremes, high loading, shock loading, vibration, high speed, wet and saturated conditions, corrosive conditions, chemical or/and dust and dirty environments

'Novus' specialist lubricants are designed for extreme operating environments where more conventional types of lubricants are limited in their ability to withstand extreme conditions and breakdown prematurely, resulting in frequent re-lubrication intervals, and on many occasions frequent component replacement.

INTRODUCTION
SwanTek® 'Novus' ColdTempLube is a premium quality grease specifically designed for anti-friction bearings operating at extremely low temperatures as encountered in deep freezing plants and arctic locations. 'Novus' ColdTempLube will provide long term lubrication at temperatures down to -60°C without the difficulties of excessive drag usually associated with most lubricants operating at such low temperatures.
Due to its high DN factor, 'Novus' ColdTempLube can also be used for the lubrication of high speed spindles bearings.

COST SAVING BENEFITS
1. Good stability at extremely low temperatures prolongs lubrication intervals
2. Corrosion inhibitors protect against condensation caused by changing temperatures
3. Anti-wear properties provide protection against premature component wear
4. Good water resistance, therefore suitable for both indoor and outdoor applications

TYPICAL PHYSICAL CHARACTERISTICS
Appearance - Brown soft grease
NLGI Classification - 2
Thickener - Lithium complex
Base fluid - Blend of synthetic oils
Base fluid viscosity
@ 100 oC - 4 cSt
@ 40 oC -11 cSt
Water washout (IP 215) - 2% max.
Dynamic corrosion resistance (IP 220) - 0:0
Copper corrosion (IP 112) - 1a
Shell Four Ball (IP 239) Weld load - 200kgs
DN Factor - 1,200,000
Operating temperature range - -60oC to +130oC

For professional use only. The above information is given in good faith but without warranty and does not constitute a technical specification. For technical support and application guidance call 01539 722247. Technical specifications and certificates of conformity and analysis available on request.

For help with how to place your order click here.

Notes 1. Prices exclude VAT and are valid only for pack sizes stated. Prices subject to change without notice. 2. For volume discounts other than those shown above call 01539 722247. 3. Delivery is usually next working day for items in stock. Delivery charged by weight from £13.50 to a maximum of £45.00. Additional charges apply for delivery to Scottish Highlands, Northern Ireland and offshore islands, and for timed deliveries, hazardous goods and branded lubricants. 4. All major credit/debit/purchasing cards accepted. Minimum credit account invoice applies.