Description • Instructions • Sizes, Prices & Offers

SwanTek® 'Novus' Arduous Duty greases meet the needs of most aggressive working conditions including temperature extremes, high loading, shock loading, vibration, high speed, wet and saturated conditions, corrosive conditions, chemical or/and dust and dirty environments

'Novus' specialist lubricants are designed for extreme operating environments where more conventional types of lubricants are limited in their ability to withstand extreme conditions and breakdown prematurely, resulting in frequent re-lubrication intervals, and on many occasions frequent component replacement.

INTRODUCTION
SwanTek® 'Novus' High Load Grease is a premium quality semi-synthetic lithium complex grease specifically designed for use in slow moving, heavily loaded plain and roller bearings. It’s high base oil viscosity (ISO VG 1500) means the grease is very tenacious and will resist movement in the bearing or housing due to vibration or water wash. The combination of extreme pressure, anti-wear, antioxidant, and corrosion inhibitor additives is also fortified by the addition of laminar solid lubricants to give all round protection against both constant and shock loading.

COST SAVING BENEFITS

1. Exceptional load carrying ability substantially extends component life
2. Being fully resistant to the wet extends the life of the lubricant and protects against corrosion
3. Good oxidation stability enables the grease to provide lasting lubrication at high temperatures
4. A high degree of mechanical stability extends lubrication intervals

TYPICAL PHYSICAL CHARACTERISTICS

Appearance- Black, soft, smooth grease
NLGI classification -1
Thickener -Lithium complex
Base oil- Mineral and synthetic hydrocarbon
Dropping point (ASTM D2265)- 250oC min.
Solid lubricants -Molybdenum disulphide and graphite
Solid lubricants content - 6.5%
Dynamic corrosion resistance (EMCOR IP 220) - 0:0
Copper corrosion (IP 112) -Negative
Oil separation (IP 121) -1%
Timken OK load (IP 326) - 25kgs
Water resistance (DIN51807)- Fully resistant
Shell Four BallWeld load (IP 239) -500kg
Operating temperature range - +10oC to +150oC (180oC intermittent)

For professional use only. The above information is given in good faith but without warranty and does not constitute a technical specification. For technical support and application guidance call 01539 722247. Technical specifications and certificates of conformity and analysis available on request.

For help with how to place your order click here.

Notes 1. Prices exclude VAT and are valid only for pack sizes stated. Prices subject to change without notice. 2. For volume discounts other than those shown above call 01539 722247. 3. Delivery is usually next working day for items in stock. Delivery charged by weight from £13.50 to a maximum of £45.00. Additional charges apply for delivery to Scottish Highlands, Northern Ireland and offshore islands, and for timed deliveries, hazardous goods and branded lubricants. 4. All major credit/debit/purchasing cards accepted. Minimum credit account invoice applies.