Description • Instructions • Sizes, Prices & Offers

Solid lubricant paste for bolted metal joints; contains no lead or nickel.
Applications
Suitable for bolted joints that are subjected to high temperatures up to 1100°C and to corrosive effects, and which, after assembling and the initial operation, have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady co-efficients of friction of the lubricant are necessary.
Used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry and also for the tension rings of centrifuges.
Features
Can be used over a wide temperature range (-30°C to + 1100°C). High load bearing capacity. Enables non-destructive dismantling, even after long use at high temperatures. Co-efficient of friction unchanged in the area of oiled bolts, even after several bolt re-tightening and loosening processes.
Composition
Solid lubricants - Mineral oil - Thickener - Powdered metal

For full technical information see:
• Molykote 1000 Technical Data Sheet.

How to Use
If possible, clean the thread and the bolt with a wire brush. Spread an adequate amount of the paste on the thread, right up to its root in order to obtain a good seal. In order not to alter the properties the paste must not be mixed with grease or oils. It is advisable to use the aerosol application to enable this product to be applied more quickly and cleanly to larger areas.
Note: Coefficient of friction( 8.8 blackened surface)Thread - blackened 0.11
Head - blackened 0.10

®Registered Trade Mark Dow Corning

For professional use only. The above information is given in good faith but without warranty and does not constitute a technical specification. For technical support and application guidance call 01539 722247. Technical specifications and certificates of conformity and analysis available on request.

For help with how to place your order click here.

Notes 1. Prices exclude VAT and are valid only for pack sizes stated. Prices subject to change without notice. 2. For volume discounts other than those shown above call 01539 722247. 3. Delivery is usually next working day for items in stock. Delivery charged by weight from £13.50 to a maximum of £45.00. Additional charges apply for delivery to Scottish Highlands, Northern Ireland and offshore islands, and for timed deliveries, hazardous goods and branded lubricants. 4. All major credit/debit/purchasing cards accepted. Minimum credit account invoice applies.